Live Chat
Automotive (production, maintenance)
Checking the fitting of the brake pads of the disc brakes
Disc brakes serve to reduce or halt the motion of an automobile by means of th frictional force between the discs and brake pads. If the fit between the discs and
the pads is not optimal, serious defects can occur. These include brake failure, uneven component wear, noise and vibration. Thus, the proper fitting of brake pads
is important for automobile performance, safety, and part life. Yet, until now, there has been no easy way to check the fit between the pads and discs.
the pads is not optimal, serious defects can occur. These include brake failure, uneven component wear, noise and vibration. Thus, the proper fitting of brake pads
is important for automobile performance, safety, and part life. Yet, until now, there has been no easy way to check the fit between the pads and discs.
Product used: Prescale (Medium Pressure MW/MS and High Pressure HS)
Sandwich the Prescale film between the disc and brake pad and apply brake pressure equivalent to normal conditions. Then remove the film and assess its coloring.
It should be easy to determine:
It should be easy to determine:
- whether the fitting is optimal
- the performance of brake pad and disk
- wear conditions after the test drive
Poor
Contact pressure between disc
and brake pad is uneven
and brake pad is uneven
Good
Fit between disc and brake pad is
uniform and of optimum pressure
uniform and of optimum pressure
Time savings
Design efficiency is greatly improved compared to repeated trial and error
Quality improvement
Prescale enables easy measurement at anytime, thereby ensuring a stable braking system. This also helps to improve the performance and stability of other related auto
parts.
parts.
Without using Prescale
Design and assembly are based on experience and estimation, and results are confirmed by actual braking tests. this repeated trial and error results in substantial losses of time and labor. Additionally, since assessments are made based on the subjective evaluations of drivers and the conditions of parts, it is not possible to implement evidence-based quality control.
Using Prescale
Valuable data about effectiveness, pad wear unevenness, brake noise and vibration during braking, etc., can be accumulated by examining the coloring and patterns collected on the Prescale film. This data enables optimum brake design in a short period of time. Prescalecan be also be used to check the product quality after long test drives.