Fujifilm Thermoscale® - Tactile Surface Temperature Indicating Film
Thermoscale® is a unique tool that indicates temperature level and distribution between any two contacting surfaces. The most unique quality of Thermoscale® is that is goes where no other IR camera or temperature gauge can ever go - on the surface of the heated object and in between two contacting surfaces!
- No training required and extremely easy to use very economical
- Work where no IR camer can-in between contacting surfaces
How it works
Heat melts the developer and makes the microcapsule walls permeable, allowing developer to enter the microcapsules, where it reacts with the color-forming agent to produce color.
Making the invisible visible
Thermoscale® is a thin (similar to a sheet of paper) flexible film-like material that actually changes color when it comes in contact with elevated temperature. The color change is both instantaneous and permanent and allows the user to “read” and interpret the color to get a fix on precisely what temperature has been reached at all points across the heated surface. Physically similar to Litmus paper the color that Thermoscale® turns is directly proportional to the temperature level.
- Heat sealing
- Lamination presses
- Nip rollers
- LCD/PCB bonding
|Film Type||Measureable Temperature Range*||Contact Time||Base Layer||Gauge||Color Temperature Visualization||Dimensions|
|Thermoscale 200C||302 - 410°F (150 - 210°C)||5 - 20 sec.||PEN||3.5 mils||Blue / Magenta||10.6 in. x 16.4 ft. (270 mm × 5 m)|
|Thermoscale 100||176 - 221°F (80 - 105°C)||1 - 10 sec.||PET||3.5 mils||Grayscale||11.7 in. x 32.8 ft. (297 mm x 10 m)|
*Actual temperature range depends on conditions of use including contact time, materials, pressure, and air flow.
"I used the Thermoscale Film for the first time and it worked Great to pin point cold sections on a defective seal bar. "