Free Sensor Sample Order Now

Operator Terminal Gel 8810

8810


Operator Terminal GEL 8810

Hardware Description

Concept
The operator terminal was designed as a control an display unit for up to 31 Controllers of the series GEL 8000 and GEL 8100. It permits to edit and visualize nominal values and machine parameters and to display actual values. The interface software can be adjusted by Lenord+ Bauer upon request.

Design
The housing of the operator’s terminal is made of iron plate and was designed for being used in a control panel, its front size being 160 mm X 160 mm and a front-to-back size of 57 mm.

The touch sensitive keyboard is highly userfriendly, since its 18 mm x 18 mm shortstroke keys can be labelled in accordance with the user ‘s requirements. A large LCD guarantees a good legibility, even if the lighting conditions are bad. The LCD of the GEL 8810 0XX has a background lighting as additional feature. The user can adjust the contrast according to his individual requirements.

Serial Interfaces
Two serial Interfaces, i. e. RS 232 or RS 485, are available.


Technical data

supply voltage 18 ... 30 V DC, 15 ... 26 V AC
power consumption approx. 0.7 A with background lighting, approx. 0.35 A without background lighting
Interfaces
bit rate to the PC 19,200 Baud, 9,600 Baud (EcoController), 4,800 Baud (MiniController), 8 data bits, even parity, 1 stop bit
Logic inputs
level low: 0 ... + 5 V ; high: +15 ... + 30 V
Climatic application classes according to DIN 40040
ambient temperature range 0 °C ... + 50 °C
storing temperature range -20 °C ... +80 °C
relative air humidity up to 95%, non condensing
EMC (observance of the assembly instructions is mandatory)
electromagnetic emissions EN 61000-6-3
electromagnetic immunity EN 61000-6-2
The GEL 8810 apparatus complies with the EU Directive EMC 89/336 EEC and therefore the CE mark was affixed to it.
Display
display LCD with 4 lines each having 20 digits, with yellow background lighting in the GEL 8810 0XX
line height 9 mm (dot matrix 8 x 5)
line length 120 mm
Housing
material iron plate, powder coated
weight approx. 0.5 kg
Protection class according to DIN 40050
front IP 65 (GEL 8810 0XX) or IP 54 (GEL 8810 AXX)
back IP 20




8810-2



8810-3



8810-4

Type code
8810-5

GEL 8810 0 D 1 IP 65, background lighting,
galvanically separated RS 485,
communication software for
EcoControllerGEL 81XX
GEL 8810 0 D 2 IP 65, background lighting,
galvanically separated RS 485,
communication software for
MiniController GEL 8010
GEL 8810 0 D 3 IP 65, background lighting,
galvanically separated RS 485,
communication software for
MiniController GEL 8080/85
GEL 8810 0 D 5 P 65, background lighting,
galvanically separated RS 485,
communication software for
Eco- and MiniController,
flash memory
GEL 8810 0 D 6 IP 65, background lighting,
galvanically separated RS 485,
communication software for
MiniController GEL 8010,
incl. option: start/stop keys
GEL 8810 A 0 2 IP 54, RS 485,
communication software for
MiniController GEL 8010
GEL 8810 A 0 3 IP 54, RS 485,
communication software for
MiniController GEL 8080/85
GEL 8810 A 0 6 IP 54, RS 485,
communication software for
MiniController GEL 8010,
incl. option: start/stop keys



Dimensioned drawing
8810-6

Accessories
connecting cable to the Eco/MiniController, 2.5 m GEL 89019
connecting cable to the MiniController (single cores), 2.5 m GEL 89020
mains transformer GEL 7923

Lenord & Bauer: Rail Speed Sensors & Rotary Pulse Encoder

Other products relating to GEL 8810 are: GEL 8819