Lenord+Bauer Rail Speed Sensor & Rotary Pulse Encoder Accessories

Mounting brackets, Installation, Condensed-water outlet

Mounting bracket MW 52 for Rotary Pulse encoder GEL 152 ... 208/Mounting bracket MW 92 for Rotary Enocder encoder GEL 260


Installation example (Encoder, Mounting bracket MW 52) - Condensed-water outlet
1) for all encoders GEL ... (excluding GEL 260 EEx)

Clamps, Flange, Measuring Wheel, Collet chuck

clampkl200 - Lenor & Baurer Absolute Encoder and Incremental Encoders


clampkl260/150 - Lenord & Bauer Absolute and Incremental Encoders

Mounting flange MF 121 for GEL 260 Lenord & Bauer Absolute and Incremental Encoders


Measuring wheel MRM500/MRG500 - Lenord & Bauer Rail Speed Sensor & Rotary Pulse Encoders

Couplings

Metal coupling MK 8/MK 12/Screw mount coupling MKF 8/MKF 12


Clamp Coupling KK14 - Lenord & Bauer Rail Speed Sensor & Rotary Pulse Encoders

Measuring Arm

Measuring Arms 262/205 for Incremental encoder GEL 260 and Incremental encoder GEL 208

Measuring arm MA 262/205 - Lenord & Bauer rail speed sensor & Rotary Pulse encoders

Bearing Pedestal

Bearing pedestal LB 200/Bearing pedestal LB 150 /LB 154 - Lenord & Bauer rail speed sensor & Rotary Pulse encoders


Application example - Length measurement via tooth belt (by the meter). One turn of the encoder equals 100 mm travel.

Measuring pedestal

Measuring pedestal with slip free belt drive for incremental or absolute measurement of large distance for example on cranes.

Measuring pedestal MB 150/MB 154 for absolute encoders GEL 154 or GEL 158

Measuring pedestal MB 206 with mounted encoder GEL 209



Tensioner SE 206 (1), Tension Head SK 206 (2, kit) - Lenord & Bauer rail speed sensor & Rotary Pulse encoders



Toothed Belt ZR 206

Dimension: width 10 mm, tooth pitch 5 mm
Construction: 10 Steel-Cord strands (0.32 mm diameter bedded into Polyurethane-Elastomer)
Techn. Data: operating temperature - 10° C ... +80° C
short term 120° C
breaking load 1200 N
max. tension 300 N at 4 %o elasticity
Weight: 0.022 kg
Accuracy*: typ. ± 0.3 mm/m at 60 N toothed belt tension
In a mounted condition the accuracy can be improved by altering the tension. The stretching characteristic is linear. The coefficient is 0.01 mm / (1 m · 1 N).
Advantages: Unaffected by damp, petrol, oil, fats, hydrosol, uv-rays, ozone etc. Steel-Cord as tensioning.
strands: constant lengths at specified load, no additional stretching. (toothed belt for -30° C on request)

Protective casing SG 110/111

This casing protects rotary pulse encoders GEL 207/260 or absolute encoders GEL 152/153 against high mechanical stress and environmental conditions.

Attention: The shaft of rotary pulse encoder GEL 207 must have a diameter of 12 mm.
  • Material: non-ferrous metal, seawater-resistant
  • Type of protection: IP 65
  • Seals: oil- and petrol-resistant
  • Painting: hammer-finish green RAL 6011


Casing Cable glands Dimension a Dimension b Dimension c Dimension L Weight [KG]
SG 110 5 x PG21 225 244 234 278 9.4
SG 111 6 x PG21 285 304 294 338 12.0

Protective casing SG 150/208

SG 150 for absolute encoders
  • GEL 152/153 single- or multiturn with parallel or SSI output (cf. Technical Information on encoders, absolute encoder GEL 15X, SSI or parallel interface)
  • GEL 152 F for remote programming by PC (cf. Technical Information on encoders, absolute encoder GEL 15X, PC-programmable
SG 208 for incremental rotary encoders
  • GEL 208 (cf. Technical Information on incremental encoders GEL 207... 219)
Material: anodized aluminium, wall thickness 5 mm
Type of protection: IP 68


SG 150/208 with round and square flange

Lenord & Bauer rail speed sensor & Rotary Pulse encoders - Absolute and incremental encoders

Type Code SG 150
Lenord & Bauer rail speed sensor & Rotary Pulse encoders - Absolute encoders

Type Code SG 208
Lenord & Bauer rail speed sensor & Rotary Pulse encoders - Incremental encoders

Lenord & Bauer: Rail Speed Sensors & Rotary Pulse Encoder